Electric Above Ground Pool Heater

Cold water? Raise the temperature of your pool water by 3 or 4°C with the Intex heater. Connect it to the pool filtration line, after the filter pump, and you're done. Thanks to the temperature sensor, it turns off automatically if the water or the heater itself reaches a temperature above the standard. Simple to use, it is suitable for above ground pools with a diameter equal to or less than 457 cm.

Voltage 220-240V

Ideal for getting a little extra use out of your pool at the start and end of the Summer season, the Intex 2.2kw above ground electric swimming pool heater is also ideal for giving your pool water a bit of extra warmth.

The Intex 2.2kw Above Ground Electric Pool is suitable for use with Intex easy set or metal frame pools with a diameter of 245 to 365cm, it easily connects in line with your pool cartridge filter pump. Although the heater will fit most 450cm Intex pools we don't recommend using one. 

• 1.Filter Pump Flow Rate Requirement: 500 - 2500 gallons/hour (1893 - 9464 liters/hour).
• 2. Working Pool Water Temperature Range: 17 degrees Celsius to 35 degrees Celsius.
• 3. Suitable to be used for pool with water capacity: below 4500 gallons (17033 liters).
• 4. During pool water heating, put a solar cover over the pool in order to prevent heat loss. 5. Make sure the switch is fully turned to the ON position. Box Contains 1 x Heater